Schneider Electric
ATV12H037M2 Altivar 12 0.37 kW 200–240 V Single-Phase Variable Speed Drive | Schneider Electric
ATV12H037M2 Altivar 12 0.37 kW 200–240 V Single-Phase Variable Speed Drive | Schneider Electric
40 en existencias
No se pudo cargar la disponibilidad de retiro
The Original New Schneider Electric ATV12H037M2 Altivar 12 is a compact variable speed drive designed for controlling three-phase asynchronous motors in simple industrial machinery and automation applications. Rated at 0.37 kW (0.55 HP), it operates with a single-phase 200–240 V AC power supply and delivers a continuous three-phase output current of 2.4 A at the nominal 4 kHz switching frequency.
Featuring an integrated EMC filter, built-in heat sink, and IP20 enclosure, the Altivar 12 provides a compact motor-control solution for electrical cabinets and machinery installations. Its sensorless flux vector control, linear voltage/frequency control, and quadratic V/f control modes support flexible motor operation. Adjustable acceleration and deceleration ramps allow motor starting and stopping characteristics to be configured according to application requirements.
The drive incorporates four programmable logic inputs, two logic outputs, one analog input, one analog output, and one relay output. Its built-in two-wire RS-485 interface with an RJ45 connector supports Modbus RTU communication, enabling integration with compatible PLCs, industrial controllers, and automation equipment.
Additional functions include adjustable motor slip compensation, DC injection braking, and integrated motor thermal protection using continuous I²t calculation. The compact M2-frame heat-sink design, without a built-in cooling fan, makes the ATV12H037M2 suitable for small industrial machines requiring reliable variable-speed motor control from a single-phase electrical supply.
Core Engineering Highlights:
0.37 kW / 0.55 HP rated motor power | Single-phase 200–240 V AC input | Three-phase 200–240 V AC motor output | 2.4 A continuous output current at 4 kHz | 3.6 A transient output current for 60 seconds | Integrated EMC filter | IP20 enclosure | Built-in heat sink | Fanless design | Sensorless Flux Vector Control | V/f and quadratic V/f control | Adjustable motor slip compensation | 4 programmable logic inputs | 1 analog input | 1 analog output | 1 logic output | 1 relay output | RS-485 Modbus RTU communication
Key Features:
-
Original New Schneider Electric ATV12H037M2 Altivar 12 variable speed drive.
-
0.37 kW / 0.55 HP rated motor power for compatible three-phase asynchronous motors.
-
Single-phase 200–240 V AC electrical supply with three-phase 200–240 V AC motor output.
-
Continuous output current of 2.4 A at the nominal 4 kHz switching frequency.
-
Maximum transient output current of 3.6 A for 60 seconds.
-
Integrated EMC filter for improved electromagnetic compatibility in industrial installations.
-
Built-in heat sink with fanless construction.
-
IP20 enclosure protection for installation inside suitable electrical cabinets.
-
Sensorless Flux Vector Control supports motor speed regulation without an external speed encoder.
-
Supports linear V/f and quadratic V/f control profiles for different motor-load characteristics.
-
Adjustable switching frequency from 2 to 16 kHz, subject to applicable derating requirements.
-
Adjustable acceleration and deceleration ramps from 0 to 999.9 seconds, with linear, S-curve, and U-curve profiles.
-
Four programmable logic inputs support external motor-control commands.
-
One configurable analog input supports 0–10 V, 0–5 V, or 0–20 mA reference signals.
-
One configurable analog output supports 0–10 V or 0–20 mA monitoring signals.
-
One logic output and one changeover relay output provide flexible control and monitoring interfaces.
-
Built-in RS-485 interface with RJ45 connector supports Modbus RTU communication.
-
DC injection braking provides motor stopping functionality without requiring an external braking resistor.
-
Adjustable motor slip compensation supports improved motor speed regulation.
-
Integrated motor thermal protection uses continuous I²t calculation.
-
Compact M2-frame design is suitable for space-constrained industrial machinery installations.
Applications:
-
Small industrial machinery and automated equipment.
-
Conveyor systems and material handling machinery.
-
Small pumps and water circulation systems.
-
Ventilation fans and air-handling equipment.
-
Packaging and processing machinery.
-
Small mixers and production equipment.
-
Textile machinery and commercial equipment.
-
Machine tools and workshop machinery.
-
PLC-controlled machines using Modbus RTU communication.
-
Simple automation systems requiring single-phase power supply and three-phase motor control.
-
Applications requiring adjustable acceleration, deceleration, and motor speed regulation.
Technical Specifications:
| Attribute | Specification |
|---|---|
| Catalog Number | ATV12H037M2 |
| Product Type Designation | Altivar 12 Variable Speed Drive |
| Product Family | Schneider Electric Altivar 12 |
| Product Category | Variable Frequency Drive (VFD) |
| Product Type | Compact Variable Speed Drive |
| Product Specific Application | Simple Machines |
| Assembly Style | With Heat Sink |
| Mounting Mode | Cabinet Mount |
| Rated Motor Power | 0.37 kW / 0.55 HP |
| Supply Phase | Single-phase |
| Input Voltage | 200–240 V AC |
| Input Voltage Tolerance | -15% / +10% |
| Input Frequency | 50/60 Hz ±5% |
| Line Current at 200 V | 5.9 A |
| Line Current at 240 V | 4.9 A |
| Prospective Line Short-Circuit Current | ≤1 kA |
| Output Phase | Three-phase |
| Output Voltage | 200–240 V AC |
| Continuous Output Current | 2.4 A at 4 kHz |
| Maximum Transient Output Current | 3.6 A for 60 seconds |
| Output Frequency Range | 0.5–400 Hz |
| Speed Range | 1:20 |
| Motor Control | Sensorless Flux Vector / V/f |
| Asynchronous Motor Control Profiles | Linear V/f / Quadratic V/f |
| Transient Over-Torque | 150–170% of nominal motor torque, depending on motor and drive rating |
| Nominal Switching Frequency | 4 kHz |
| Adjustable Switching Frequency | 2–16 kHz |
| Switching Frequency with Derating | 4–16 kHz |
| EMC Filter | Integrated |
| EMC Emission Category | C1 / C2, depending on installation conditions |
| Built-in Fan | Not Included |
| Cooling Method | Heat Sink |
| Braking Function | DC Injection Braking |
| Braking Torque Without External Resistor | Up to 70% of nominal motor torque |
| Motor Slip Compensation | Preset / Adjustable |
| Enclosure Protection | IP20, subject to the specified protective-cover configuration |
| Mounting Frame | M2 |
| Mounting Position | Vertical ±10° |
| Housing Material | Plastic |
| Analog Inputs | 1 |
| Analog Input Terminal | AI1 |
| Analog Input Signals | 0–10 V / 0–5 V / 0–20 mA |
| Analog Input Impedance | 30 kΩ (Voltage) / 250 Ω (Current) |
| Digital Inputs | 4 programmable |
| Digital Input Terminals | LI1, LI2, LI3, LI4 |
| Digital Input Voltage | 24 V DC |
| Digital Input Logic | Positive / Negative Logic |
| Digital Outputs | 2 |
| Digital Output Configuration | 1 Logic Output + 1 Relay Output |
| Logic Output Terminals | LO+ / LO- |
| Analog Outputs | 1 programmable |
| Analog Output Terminal | AO1 |
| Analog Output Signals | 0–10 V / 0–20 mA |
| Analog Output Resolution | 8 bits |
| Relay Outputs | 1 changeover relay |
| Relay Terminals | R1A / R1B / R1C |
| Minimum Relay Switching Current | 5 mA at 24 V DC |
| Maximum Relay Rating – Resistive | 3 A at 250 V AC / 4 A at 30 V DC |
| Maximum Relay Rating – Inductive | 2 A at 250 V AC / 2 A at 30 V DC |
| Communication Interface | Two-wire RS-485 |
| Communication Connector | 1 × RJ45 |
| Built-in Communication Protocol | Modbus RTU |
| Modbus Transmission Rate | 4,800 / 9,600 / 19,200 / 38,400 bit/s |
| Modbus Address Range | 1–247 |
| Internal Logic Supply | 24 V DC, 100 mA |
| Internal Potentiometer Reference Supply | 5 V DC, 10 mA |
| Acceleration / Deceleration Ramps | 0–999.9 seconds |
| Ramp Profiles | Linear / S-Curve / U-Curve |
| DC Injection Braking Duration | 0.1–30 seconds |
| Motor Thermal Protection | Continuous I²t Calculation |
| Additional Protection | Supply Overvoltage, Undervoltage, Output Overcurrent, Motor Short-Circuit and Overheating Protection |
| Electrical Connection | 3.5 mm² / AWG 12 |
| Terminal Tightening Torque | 0.8 N·m |
| Dimensions (W × H × D) | 72 × 143 × 121.2 mm |
| Net Weight | Approximately 0.7 kg |
| EAN / GTIN | 3606480071058 |
| Operating Temperature | -10 to +40°C |
| Operating Temperature with Derating | +40 to +60°C |
| Current Derating Above 40°C | 2.2% per °C |
| Storage Temperature | -25 to +70°C |
| Maximum Relative Humidity | 5–95%, non-condensing |
| Maximum Altitude Without Derating | 1,000 m |
| Maximum Altitude With Derating | 2,000 m, subject to 1% current derating per 100 m above 1,000 m |
| Pollution Degree | 2 |
| Vibration Resistance | IEC 60068-2-6 |
| Shock Resistance | 15 gn, IEC 60068-2-27 |
| EMC Standards | IEC 61800-3, IEC 61000-4 Series |
| Electrical Safety Standard | IEC 61800-5-1 |
| Certifications | CE, UL, CSA, C-Tick, GOST, NOM |
System Compatibility:
-
Designed for single-phase 200–240 V AC industrial electrical supply systems.
-
Provides three-phase variable-frequency output for compatible three-phase 200–240 V AC asynchronous motors.
-
Suitable for motor applications rated up to 0.37 kW / 0.55 HP.
-
Continuous motor output current must remain within the rated 2.4 A at the nominal 4 kHz switching frequency.
-
Sensorless Flux Vector Control supports motor speed regulation without an external speed encoder.
-
Linear V/f and quadratic V/f control modes provide alternative motor-control configurations.
-
Four programmable logic inputs support external forward, reverse, stop, and other configured motor-control commands.
-
One analog input accepts 0–10 V, 0–5 V, or 0–20 mA reference signals.
-
One programmable analog output supports 0–10 V or 0–20 mA external monitoring.
-
One logic output supports external status and control signaling.
-
One changeover relay output provides a compatible interface for external equipment control and status monitoring.
-
Built-in RS-485 communication supports Modbus RTU integration with compatible PLCs and industrial automation controllers.
-
Modbus RTU supports configurable communication speeds and device addressing.
-
Adjustable motor slip compensation supports improved speed regulation under changing loads.
-
DC injection braking provides a motor-stopping function without requiring an external braking resistor.
-
The integrated EMC filter supports specified C1 or C2 conducted-emission performance depending on switching frequency, shielded motor-cable length, and installation conditions.
-
For installations requiring enhanced EMC conformity, the optional VW3A9523 EMC conformity kit provides an EMC plate, clamps, and mounting accessories.
-
The optional VW3A9804 mounting plate supports installation on a 35 mm symmetrical DIN rail.
-
IP20 enclosure requires installation inside a suitable electrical control cabinet.
-
Operating temperatures above +40°C require current derating according to Schneider Electric specifications.
-
Confirm motor nameplate voltage, motor current, single-phase supply capacity, control wiring, Modbus settings, EMC requirements, and installation clearances before commissioning or replacement.
Related Products:
-
ATV12H018M2 – Schneider Electric Altivar 12 0.18 kW 200–240 V Single-Phase Variable Speed Drive
-
ATV12H055M2 – Schneider Electric Altivar 12 0.55 kW 200–240 V Single-Phase Variable Speed Drive
-
ATV12H075M2 – Schneider Electric Altivar 12 0.75 kW 200–240 V Single-Phase Variable Speed Drive
-
ATV12H037M3 – Schneider Electric Altivar 12 0.37 kW 200–240 V Three-Phase Variable Speed Drive
-
ATV320U04M2C – Schneider Electric Altivar Machine ATV320 0.37 kW 200–240 V Compact Drive
-
VW3A9804 – Schneider Electric Altivar DIN-Rail Mounting Plate for M2 Frame
-
VW3A9523 – Schneider Electric Altivar EMC Conformity Kit
-
VW3A9317 – Schneider Electric Altivar +15 V / +24 V Voltage Converter
PLC ERA is an independent industrial automation distributor supplying genuine Original New products through established global supply channels. All products are factory sealed when applicable and undergo quality inspection prior to shipment. Schneider Electric and Altivar are registered trademarks of Schneider Electric SE.
Nota: Para garantizar que reciba la cotización más competitiva del momento, le recomendamos que se ponga en contacto con nuestro equipo de ventas. Dado que los precios del mercado se actualizan constantemente, le proporcionaremos la información más reciente. Puede completar el formulario de contacto a continuación y esperar a que nuestro servicio de atención al cliente se comunique con usted, usar el chat en línea en la esquina inferior derecha o hacer clic directamente en " Contactar con el servicio de atención al cliente ".
Compartir
