Schneider Electric
ATV12H075M2 Altivar 12 0.75 kW 200–240 V Single-Phase Variable Speed Drive | Schneider Electric
ATV12H075M2 Altivar 12 0.75 kW 200–240 V Single-Phase Variable Speed Drive | Schneider Electric
48 في المخزون
لم نتمكن من تحميل توفر الاستلام
The Original New Schneider Electric ATV12H075M2 Altivar 12 is a compact variable speed drive designed for controlling three-phase asynchronous motors in simple industrial machinery and automation applications. Rated at 0.75 kW (1 HP), it operates with a single-phase 200–240 V AC power supply and delivers a continuous three-phase output current of 4.2 A at the nominal 4 kHz switching frequency.
Featuring an integrated EMC filter, built-in heat sink, and IP20 enclosure, the Altivar 12 provides a compact motor-control solution for electrical cabinets and machinery installations. Its sensorless flux vector control and voltage/frequency control modes support flexible motor operation, while adjustable acceleration and deceleration ramps allow motor starting and stopping to be configured according to application requirements.
The drive incorporates four programmable logic inputs, two logic outputs, one analog input, one analog output, and one relay output. Its built-in two-wire RS-485 interface with an RJ45 connector supports Modbus RTU communication, enabling integration with compatible PLCs, industrial controllers, and automation equipment.
Additional functions include an adjustable PID controller, motor slip compensation, DC injection braking, and integrated motor protection. With its compact dimensions and heat-sink construction, the ATV12H075M2 is suitable for small machinery requiring reliable variable-speed motor control from a single-phase electrical supply.
Core Engineering Highlights:
0.75 kW / 1 HP rated motor power | Single-phase 200–240 V AC input | Three-phase 200–240 V AC motor output | 4.2 A continuous output current at 4 kHz | 6.3 A transient current for 60 seconds | 6.9 A transient current for 2 seconds | Integrated EMC filter | IP20 enclosure | Built-in heat sink | Sensorless Flux Vector Control | V/f and quadratic V/f control | Adjustable PID controller | 4 programmable digital inputs | 2 digital outputs | 1 analog input | 1 analog output | 1 relay output | RS-485 Modbus RTU communication
Key Features:
-
Original New Schneider Electric ATV12H075M2 Altivar 12 variable speed drive.
-
0.75 kW / 1 HP rated motor output for compatible three-phase asynchronous motors.
-
Single-phase 200–240 V AC power supply with three-phase 200–240 V AC motor output.
-
Continuous output current of 4.2 A at the nominal 4 kHz switching frequency.
-
Transient output current of 6.3 A for 60 seconds and 6.9 A for 2 seconds under specified heavy-duty conditions.
-
Integrated EMC filter for improved electromagnetic compatibility in industrial installations.
-
Built-in heat sink supports compact cabinet-mounted installation.
-
IP20 enclosure protection for installation inside suitable electrical cabinets.
-
Sensorless Flux Vector Control and V/f control modes support flexible motor operation.
-
Quadratic voltage/frequency control profile is suitable for variable-torque applications.
-
Adjustable switching frequency from 2 to 16 kHz, subject to applicable derating requirements.
-
Adjustable acceleration and deceleration ramps from 0 to 999.9 seconds.
-
Adjustable PID controller supports closed-loop process regulation.
-
Four programmable logic inputs support external motor-control commands.
-
Two logic outputs, one analog input, and one analog output provide flexible control and monitoring interfaces.
-
One relay output supports external equipment status and control functions.
-
Built-in RS-485 interface with RJ45 connector supports Modbus RTU communication.
-
DC injection braking supports motor braking without requiring a separate braking resistor for this function.
-
Integrated motor thermal protection uses continuous I²t calculation.
-
Compact design is suitable for small industrial machines and general-purpose motor-control applications.
Applications:
-
Small industrial machinery and automated equipment.
-
Conveyor systems and material handling machinery.
-
Small pumps and water circulation systems.
-
Ventilation fans and air-handling equipment.
-
Packaging and processing machinery.
-
Small mixers and production equipment.
-
Industrial equipment requiring variable-speed motor control.
-
Machine tools and workshop machinery.
-
PLC-controlled machines using Modbus RTU communication.
-
Simple automation systems requiring single-phase power supply and three-phase motor control.
-
Applications requiring adjustable acceleration, deceleration, and PID process control.
Technical Specifications:
| Attribute | Specification |
|---|---|
| Catalog Number | ATV12H075M2 |
| Product Type Designation | Altivar 12 Variable Speed Drive |
| Product Family | Schneider Electric Altivar 12 |
| Product Category | Variable Frequency Drive (VFD) |
| Product Type | Compact Variable Speed Drive |
| Product Specific Application | Simple Machines |
| Rated Motor Power | 0.75 kW / 1 HP |
| Supply Phase | Single-phase |
| Input Voltage | 200–240 V AC |
| Input Voltage Tolerance | -15% / +10% |
| Input Frequency | 50/60 Hz ±5% |
| Line Current at 240 V | 8.5 A |
| Line Current at 200 V | 10.2 A |
| Maximum Associated Fuse Rating | 12.5 A |
| Output Phase | Three-phase |
| Maximum Output Voltage | 240 V AC |
| Nominal Output Current | 4.2 A |
| Continuous Output Current | 4.2 A at 4 kHz |
| Maximum Transient Current | 6.3 A for 60 seconds |
| Maximum Transient Current | 6.9 A for 2 seconds |
| Apparent Power | 2.0 kVA at 240 V |
| Output Frequency Range | 0.5–400 Hz |
| Motor Control | Sensorless Flux Vector / V/f |
| Asynchronous Motor Control Profile | Quadratic V/f / Linear V/f |
| Transient Over-Torque | 150–170% of nominal motor torque, depending on motor and drive rating |
| Nominal Switching Frequency | 4 kHz |
| Adjustable Switching Frequency | 2–16 kHz |
| Switching Frequency with Derating | 4–16 kHz |
| Integrated EMC Filter | Yes |
| EMC Category | C1 / C2 under specified installation conditions |
| Built-in Heat Sink | Yes |
| Braking Function | DC Injection Braking |
| Integrated Brake Chopper | No |
| Braking Torque Without Braking Resistor | Up to 70% of nominal motor torque |
| Enclosure Protection | IP20 |
| Mounting Mode | Cabinet Mount |
| Mounting Position | Vertical ±10° |
| Housing Material | Plastic |
| Digital Inputs | 4 programmable |
| Digital Input Terminals | LI1, LI2, LI3, LI4 |
| Digital Input Logic | Positive / Negative Logic |
| Internal Logic Supply | 24 V DC |
| Digital Outputs | 2 |
| Analog Inputs | 1 |
| Analog Input Terminal | AI1 |
| Analog Input Signals | 0–10 V / 0–20 mA |
| Analog Outputs | 1 |
| Analog Output Terminal | AO1 |
| Analog Output Signals | 0–10 V / 0–20 mA |
| Relay Outputs | 1 |
| Relay Terminals | R1A / R1B / R1C |
| Communication Interface | 2-wire RS-485 |
| Communication Connector | 1 × RJ45 |
| Built-in Communication Protocol | Modbus RTU |
| Modbus Transmission Rate | 4.8 / 9.6 / 19.2 / 38.4 kbit/s |
| Modbus Address Range | 1–247 |
| Adjustable PID Controller | Yes |
| Motor Slip Compensation | Preset / Adjustable |
| Acceleration / Deceleration Ramp | Linear, 0–999.9 seconds |
| Motor Thermal Protection | Continuous I²t Calculation |
| Other Protection Functions | Overvoltage, Undervoltage, Overcurrent, Overheating and Motor Short-Circuit Protection |
| Prospective Line Short-Circuit Current | 1 kA |
| DC-Link Capacity | 780 µF |
| Power Dissipation | Approximately 44 W natural cooling, plus static losses |
| Dimensions (W × H × D) | 72 × 143 × 131.2 mm |
| Net Weight | Approximately 0.8 kg |
| Package Weight | Approximately 1.11 kg |
| Terminal Tightening Torque | 0.8 N·m |
| Maximum Operating Temperature Without Derating | 40°C |
| Operating Temperature with Derating | 40–60°C |
| Current Derating Above 40°C | 2.2% per °C |
| Minimum Operating Temperature | -10°C |
| Storage Temperature | -25 to +70°C |
| Maximum Relative Humidity | 95%, non-condensing |
| Maximum Altitude Without Derating | 1,000 m |
| Altitude Derating | 1% per 100 m above 1,000 m |
| Pollution Degree | 2 |
| Environmental Classification | IEC 60721-3-3 Class 3C3 / 3S2 |
| EMC Standards | IEC 61800-3 |
| Electrical Safety Standards | IEC 61800-5-1, UL 508C |
| Certifications | CE, UL, CSA, KC, RCM, GOST, NOM |
System Compatibility:
-
Designed for single-phase 200–240 V AC electrical supply systems.
-
Provides three-phase variable-frequency output for compatible 200–240 V AC asynchronous motors.
-
Suitable for motor applications rated up to 0.75 kW / 1 HP.
-
Continuous motor output current must not exceed the specified 4.2 A rating at the nominal 4 kHz switching frequency.
-
Sensorless Flux Vector Control supports motor speed regulation without requiring an external speed encoder.
-
V/f and quadratic V/f control modes provide alternative motor-control configurations.
-
Four programmable logic inputs support external forward, reverse, stop, and other configured motor-control commands.
-
Two logic outputs support external control and status signaling.
-
One analog input accepts 0–10 V or 0–20 mA reference signals.
-
One analog output supports external monitoring using 0–10 V or 0–20 mA signals.
-
One relay output provides a changeover contact for compatible external control or status circuits.
-
Built-in RS-485 communication supports Modbus RTU integration with compatible PLCs and industrial automation controllers.
-
Modbus RTU supports configurable communication speeds and device addressing.
-
Integrated PID control supports closed-loop regulation of compatible process variables.
-
DC injection braking provides a motor-stopping function without requiring an external braking resistor.
-
The integrated EMC filter supports specified C1 or C2 conducted-emission performance depending on switching frequency, motor-cable length, shielding, and installation conditions.
-
Additional EMC conformity accessories are available for installations requiring specific EMC configurations.
-
The IP20 enclosure requires installation inside a suitable electrical control cabinet.
-
Compatible with the Schneider Electric VW3A9804 DIN-rail mounting plate for 35 mm symmetrical DIN rails.
-
Compatible with the VW3A9523 EMC conformity kit for applicable Altivar 12 installations.
-
Operating temperature above 40°C requires current derating according to Schneider Electric specifications.
-
Confirm motor voltage, motor nameplate current, single-phase supply capacity, control wiring, Modbus settings, EMC requirements, and installation clearances before commissioning or replacement.
Related Products:
-
ATV12H018M2 – Schneider Electric Altivar 12 0.18 kW 200–240 V Variable Speed Drive
-
ATV12H037M2 – Schneider Electric Altivar 12 0.37 kW 200–240 V Variable Speed Drive
-
ATV12H055M2 – Schneider Electric Altivar 12 0.55 kW 200–240 V Variable Speed Drive
-
ATV12H075M3 – Schneider Electric Altivar 12 0.75 kW 200–240 V Three-Phase Variable Speed Drive
-
ATV12HU15M2 – Schneider Electric Altivar 12 1.5 kW 200–240 V Variable Speed Drive
-
VW3A9804 – Schneider Electric Altivar DIN-Rail Mounting Plate
-
VW3A9523 – Schneider Electric Altivar 12 EMC Conformity Kit
-
VW3A9317 – Schneider Electric Altivar 12 +15 V / +24 V Voltage Converter
PLC ERA is an independent industrial automation distributor supplying genuine Original New products through established global supply channels. All products are factory sealed when applicable and undergo quality inspection prior to shipment. Schneider Electric and Altivar are registered trademarks of Schneider Electric SE.
ملاحظة: لضمان حصولك على عرض الأسعار الأكثر تنافسية حاليًا، نوصي بالاتصال بفريق المبيعات لدينا. نظرًا لتحديث أسعار السوق ديناميكيًا، سنقدم لك أحدث المعلومات. يمكنك ملء نموذج الاتصال أدناه وانتظار اتصال خدمة العملاء بك، أو استخدام الدردشة عبر الإنترنت في الزاوية اليمنى السفلية، أو النقر مباشرة على "الاتصال بخدمة العملاء".
يشارك
