Schneider Electric
ATV630U75N4 Altivar Process ATV630 7.5 kW 380–480 V Variable Speed Drive | Schneider Electric
ATV630U75N4 Altivar Process ATV630 7.5 kW 380–480 V Variable Speed Drive | Schneider Electric
19 in stock
Couldn't load pickup availability
The Original New Schneider Electric ATV630U75N4 Altivar Process ATV630 is an industrial variable speed drive designed for precise motor control, energy optimization, and process management in water treatment, industrial utilities, and process automation applications. It is rated at 7.5 kW (10 HP) under normal-duty operation and 5.5 kW (7.5 HP) under heavy-duty operation, with a three-phase 380–480 V AC power supply.
Featuring an integrated EMC filter, IP21 enclosure, and forced-convection cooling, the ATV630U75N4 provides reliable motor control and electromagnetic compatibility for industrial installations. Its integrated EMC filter supports Category C2 installations with motor cables up to 50 m and Category C3 installations with motor cables up to 150 m, subject to installation requirements.
The Altivar Process ATV630 incorporates embedded power measurement, an energy dashboard, process monitoring, and intelligent asset protection functions. Its Stop and Go function helps reduce energy consumption during periods of low demand, while integrated PID control, optimized torque operation, and automatic energy optimization support efficient pump, fan, and compressor operation.
The drive supports asynchronous and synchronous motor control, including permanent magnet motors. Built-in Ethernet, Modbus TCP, and two-wire RS-485 Modbus RTU communication provide connectivity with PLCs, SCADA systems, and industrial automation networks. Its Safe Torque Off (STO) function is certified to SIL 3, supporting integration into compatible machine safety systems.
The ATV630U75N4 is suitable for industrial applications requiring continuous process control, energy monitoring, and reliable variable-speed motor operation. Its integrated graphic display and operating interface support local commissioning, parameter configuration, and equipment monitoring.
Core Engineering Highlights:
7.5 kW / 10 HP normal-duty rating | 5.5 kW / 7.5 HP heavy-duty rating | Three-phase 380–480 V AC input | 16.5 A continuous output current (normal duty) | 12.7 A continuous output current (heavy duty) | 110% normal-duty overload for 60 seconds | 150% heavy-duty overload for 60 seconds | Integrated EMC filter Class C2 / C3 | IP21 / UL Type 1 enclosure | Built-in forced-convection cooling | Asynchronous and permanent magnet motor control | Safe Torque Off (STO) SIL 3 | Embedded energy dashboard | Integrated PID controller | Ethernet / Modbus TCP / Modbus RTU | 8 digital inputs including 2 STO inputs | 3 analog inputs | 2 analog outputs | 3 relay outputs
Key Features:
-
Original New Schneider Electric ATV630U75N4 Altivar Process ATV630 variable speed drive.
-
7.5 kW / 10 HP rated motor power under normal-duty operating conditions.
-
5.5 kW / 7.5 HP rated motor power under heavy-duty operating conditions.
-
Three-phase 380–480 V AC industrial electrical supply.
-
Continuous output current of 16.5 A at 4 kHz under normal-duty conditions.
-
Continuous output current of 12.7 A at 4 kHz under heavy-duty conditions.
-
Normal-duty overload capability of 110% for 60 seconds.
-
Heavy-duty overload capability of 150% for 60 seconds.
-
Integrated EMC filter supports Category C2 with motor cables up to 50 m and Category C3 with motor cables up to 150 m under specified installation conditions.
-
IP21 enclosure with UL Type 1 protection for suitable industrial and commercial installations.
-
Built-in graphic display and operating interface for commissioning, parameter management, and drive monitoring.
-
Embedded power measurement and energy dashboard provide operating and energy-consumption information.
-
Integrated process monitoring and control functions support industrial utility applications.
-
Stop and Go function helps reduce energy consumption during low-demand operating periods.
-
Asset monitoring and protection functions support equipment condition monitoring.
-
Drift monitoring supports identification of deviations in configured process operating conditions.
-
Adjustable PID controller supports closed-loop pressure, flow, temperature, and process regulation.
-
Optimized torque and variable-torque control modes support pump and fan applications.
-
Supports asynchronous and permanent magnet synchronous motor control.
-
Built-in Safe Torque Off (STO) function certified to SIL 3.
-
Three analog inputs, eight digital inputs, two analog outputs, and three relay outputs provide flexible control interfaces.
-
Built-in Ethernet, Modbus TCP, and RS-485 Modbus RTU communication support industrial network integration.
-
Optional PROFIBUS, PROFINET, DeviceNet, CANopen, and EtherNet/IP communication modules are available separately.
-
Forced-convection cooling supports continuous industrial operation.
Applications:
-
Industrial water supply and distribution systems.
-
Municipal water and wastewater treatment plants.
-
Industrial pumping stations and water circulation systems.
-
Centrifugal pumps and booster pump systems.
-
Cooling tower fans and industrial ventilation equipment.
-
Air-handling units and commercial HVAC systems.
-
Industrial compressors and fluid-handling equipment.
-
Food and beverage processing machinery.
-
Mining and mineral-processing equipment.
-
Oil and gas pump and compressor applications.
-
Industrial process utilities and automated production systems.
-
PLC-controlled motor systems requiring Ethernet and Modbus communication.
-
Applications requiring energy monitoring and process optimization.
Technical Specifications:
| Attribute | Specification |
|---|---|
| Catalog Number | ATV630U75N4 |
| Product Type Designation | Altivar Process ATV630 |
| Product Family | Schneider Electric Altivar Process ATV600 |
| Product Category | Variable Frequency Drive (VFD) |
| Product Type | Industrial Variable Speed Drive |
| Product Specific Application | Process and Utilities |
| Variant | Standard Version |
| Mounting Mode | Wall Mount |
| Rated Motor Power – Normal Duty | 7.5 kW / 10 HP |
| Rated Motor Power – Heavy Duty | 5.5 kW / 7.5 HP |
| Supply Phase | Three-phase |
| Input Voltage | 380–480 V AC |
| Input Voltage Tolerance | -15% / +10% |
| Input Frequency | 50–60 Hz ±5% |
| Line Current at 380 V – Normal Duty | 13.8 A |
| Line Current at 480 V – Normal Duty | 11.9 A |
| Line Current at 380 V – Heavy Duty | 10.5 A |
| Line Current at 480 V – Heavy Duty | 9.2 A |
| Prospective Line Short-Circuit Current | 50 kA |
| Apparent Power at 480 V – Normal Duty | 9.9 kVA |
| Apparent Power at 480 V – Heavy Duty | 7.6 kVA |
| Continuous Output Current – Normal Duty | 16.5 A at 4 kHz |
| Continuous Output Current – Heavy Duty | 12.7 A at 4 kHz |
| Maximum Transient Current – Normal Duty | 18.2 A for 60 seconds |
| Maximum Transient Current – Heavy Duty | 19.1 A for 60 seconds |
| Normal-Duty Overload Capacity | 110% for 60 seconds |
| Heavy-Duty Overload Capacity | 150% for 60 seconds |
| Output Voltage | Up to supply voltage |
| Output Frequency Range | 0.0001–0.5 kHz / 0.0001–500 Hz |
| Nominal Switching Frequency | 4 kHz |
| Adjustable Switching Frequency | 2–12 kHz |
| Switching Frequency with Derating | 4–12 kHz |
| Motor Compatibility | Asynchronous / Synchronous Motors |
| Asynchronous Motor Control | Constant Torque / Variable Torque / Optimized Torque |
| Synchronous Motor Control | Permanent Magnet Motor |
| Motor Slip Compensation | Adjustable / Automatic / Can Be Disabled |
| Braking Function | DC Injection Braking |
| Integrated Brake Chopper | Not Included |
| Braking Resistor | Not Included |
| EMC Filter | Integrated |
| EMC Category C2 | Up to 50 m Motor Cable |
| EMC Category C3 | Up to 150 m Motor Cable |
| Enclosure Protection | IP21 |
| UL Enclosure Rating | UL Type 1 |
| Cooling Method | Forced Convection |
| Cooling Air Volume | 103 m³/h |
| Noise Level | 56 dB |
| Safety Function | Safe Torque Off (STO) |
| STO Safety Rating | SIL 3 |
| Digital Inputs | 8 total |
| Programmable Digital Inputs | 6 (DI1–DI6) |
| Safe Torque Off Inputs | 2 (STOA / STOB) |
| Digital Input Voltage | 24 V DC, maximum 30 V |
| Pulse Inputs | DI5 / DI6, configurable |
| Maximum Pulse Input Frequency | 30 kHz |
| Digital Input Logic | PNP / NPN |
| Analog Inputs | 3 programmable |
| Analog Input Signals | 0–10 V DC / 0–20 mA |
| Differential Analog Input | -10 to +10 V DC on AI2 |
| Analog Input Resolution | 12 bits |
| Analog Input Impedance – Voltage | 30 kΩ |
| Analog Input Impedance – Current | 250 Ω |
| Analog Outputs | 2 programmable |
| Analog Output Signals | 0–10 V DC / 0–20 mA |
| Analog Output Resolution | 10 bits |
| Relay Outputs | 3 programmable |
| Relay R1 | Fault Relay, NO / NC |
| Relay R2 | Sequence Relay, NO |
| Relay R3 | Sequence Relay, NO |
| Relay Contact Rating – Resistive | 3 A at 250 V AC / 30 V DC |
| Relay Contact Rating – Inductive | 2 A at 250 V AC / 30 V DC |
| RS-485 Interface | 1 |
| Ethernet Interface | 1 |
| Built-in Communication Protocols | Ethernet, Modbus TCP, Modbus RTU |
| Modbus RTU Transmission Rate | 4.8 / 9.6 / 19.2 / 38.4 kbit/s |
| Ethernet Transmission Rate | 10 / 100 Mbit/s |
| Modbus Address Range | 1–247 |
| Internal 24 V DC Supply | 21–27 V DC, 200 mA maximum |
| Potentiometer Reference Supply | 10.5 V DC ±5% |
| PID Controller | Integrated |
| Power Measurement | Embedded |
| Energy Dashboard | Embedded |
| Stop and Go Function | Yes |
| Asset Monitoring and Protection | Yes |
| Drift Monitoring | Yes |
| Estimated Power Dissipation – Natural Convection | 172 W at 380 V, 4 kHz |
| Estimated Power Dissipation – Forced Convection | 44 W at 380 V, 4 kHz |
| Total Harmonic Distortion of Current | ≤48% at 80–100% load |
| Dimensions (W × H × D) | 171 × 409 × 233 mm |
| Net Weight | Approximately 7.7 kg |
| Mounting Position | Vertical ±10° |
| Operating Temperature | -15 to +50°C without derating |
| Operating Temperature with Derating | +50 to +60°C |
| Storage Temperature | -40 to +70°C |
| Maximum Relative Humidity | 95%, non-condensing |
| Maximum Altitude Without Derating | 1,000 m |
| Maximum Altitude With Derating | 4,800 m |
| Altitude Derating | 1% per 100 m above 1,000 m |
| Pollution Degree | 2 |
| Chemical Pollution Resistance | Class 3C3 |
| Dust Pollution Resistance | Class 3S3 |
| Standards | UL 508C, EN/IEC 61800-3, EN/IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1 |
| Certifications | CE, UL, CSA, TÜV, DNV-GL, ATEX INERIS |
| ATEX Classification | Zone 2 / 22 |
| EAN / GTIN | 3606480758157 |
System Compatibility:
-
Designed for three-phase 380–480 V AC industrial electrical supply systems.
-
Suitable for compatible asynchronous and permanent magnet synchronous motors.
-
Supports 7.5 kW normal-duty and 5.5 kW heavy-duty motor applications.
-
Motor selection must follow the applicable normal-duty or heavy-duty current ratings.
-
Normal-duty continuous output current is 16.5 A at the nominal 4 kHz switching frequency.
-
Heavy-duty continuous output current is 12.7 A at the nominal 4 kHz switching frequency.
-
Supports constant-torque, variable-torque, and optimized-torque motor-control profiles.
-
Built-in PID regulation supports closed-loop control of pressure, flow, temperature, and other process variables.
-
Embedded Ethernet communication supports integration with compatible industrial networks and SCADA systems.
-
Built-in Modbus TCP and two-wire RS-485 Modbus RTU support communication with compatible PLCs and automation controllers.
-
Optional PROFIBUS DP-V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, and CANopen modules provide additional communication capabilities.
-
Three programmable analog inputs accept voltage and current reference or feedback signals.
-
Six programmable digital inputs support external start, stop, reset, and other configured control commands.
-
Two additional safety inputs support the integrated STO function.
-
DI5 and DI6 can be configured as pulse inputs with frequencies up to 30 kHz.
-
Two analog outputs support external monitoring and control.
-
Three programmable relay outputs provide drive fault and sequence-status signals.
-
The integrated STO function supports compatible safety architectures requiring SIL 3 capability.
-
The integrated EMC filter supports Category C2 with motor cables up to 50 m and Category C3 with motor cables up to 150 m under specified installation conditions.
-
The drive must be installed vertically within ±10° in accordance with the manufacturer's mounting requirements.
-
Forced-convection cooling requires suitable ventilation and minimum installation clearances.
-
Operating temperatures above +50°C require current derating.
-
Installations above 1,000 m require current derating of 1% per 100 m.
-
IP21 / UL Type 1 protection is suitable for compatible indoor installations; additional enclosure protection may be required for harsher environments.
-
The drive does not include an integrated brake chopper; evaluate the braking requirements separately when dynamic braking is needed.
-
Confirm motor nameplate ratings, duty cycle, supply voltage, EMC requirements, communication configuration, cooling conditions, and installation clearances before commissioning or replacement.
Related Products:
-
ATV630U55N4 – Schneider Electric Altivar Process ATV630 5.5 kW 380–480 V Variable Speed Drive
-
ATV630D11N4 – Schneider Electric Altivar Process ATV630 11 kW 380–480 V Variable Speed Drive
-
ATV630U75N4ZU – Schneider Electric Altivar Process ATV630 7.5 kW 380–480 V IP20 Drive for Cabinet Integration
-
ATV930U75N4 – Schneider Electric Altivar Process ATV930 7.5 kW 380–480 V Variable Speed Drive
-
VW3A1111 – Schneider Electric Altivar Graphic Display Terminal
-
VW3A3607 – Schneider Electric Altivar PROFIBUS DP-V1 Communication Module
-
VW3A3608 – Schneider Electric Altivar PROFINET Communication Module
-
VW3A3616 – Schneider Electric Altivar EtherNet/IP and Modbus TCP Communication Module
-
VW3A3420 – Schneider Electric Altivar CANopen Communication Module
PLC ERA is an independent industrial automation distributor supplying genuine Original New products through established global supply channels. All products are factory sealed when applicable and undergo quality inspection prior to shipment. Schneider Electric and Altivar are registered trademarks of Schneider Electric SE.
Shipping Details & Duties: Please note that we ship directly from Shenzhen, China, under DAP (Delivered at Place) terms. This means buyers are fully responsible for paying all local import duties, taxes, and customs clearance fees upon arrival. If a package is refused or abandoned due to unpaid customs duties, taxes, or remote surcharges, the buyer will be held responsible for the original shipping fee, all return shipping costs, and any associated losses.
Share
