CJ1W-OD232 32-Point PNP Transistor Output Module 0.5A MIL | Omron

The Original New Omron CJ1W-OD232 is a 32-point PNP (sourcing) transistor output unit for the SYSMAC CJ series programmable logic controller (PLC) platform. Designed for high-speed switching and reliable actuator control, it provides 32 outputs rated at 0.5 A per point with built-in load short-circuit protection. The module features a MIL40 connector interface for high-density wiring in space-constrained control panels. Part of the CJ-series Basic I/O Unit family, it is fully compatible with CJ1, CJ2, and NJ series CPU units.

Core Engineering Highlights:
32 PNP (sourcing) transistor outputs | 0.5 A per point | 20.4–26.4 V DC permitted output voltage | 2–8 ms OFF/ON delay | Load short-circuit protection | MIL40 connector interface (connector not included) | 1 word allocation in I/O memory | 20 mm width | 70 g weight

Key Features:

• Original New Omron CJ1W-OD232 module

• 32 PNP (sourcing) transistor outputs for 24 V DC loads

• 0.5 A per point output current capacity

• 20.4–26.4 V DC permitted output voltage range

• 2–8 ms OFF/ON delay

• Built-in load short-circuit protection for reliable operation

• MIL40 connector interface for high-density wiring (connector not included)

• Detachable I/O connector for simplified maintenance

• 1 word allocation in I/O memory

• 2 IOV (V+) terminals and 2 IOG (V-) terminals

• 20 mm slim width for space-saving panel installation

• DIN rail mounting for control cabinet installation

• 70 g lightweight design

• IP20 protection for control cabinet environments

• CJ-series Basic I/O Unit compatible with CJ1, CJ2, and NJ series

Applications:

• High-speed switching of solenoids, relays, and actuators

• Conveyor and material handling systems

• Packaging machinery and assembly lines

• Factory automation and machine control

• OEM equipment requiring high-density PNP transistor outputs

• CJ and NJ series PLC system I/O expansion

Technical Specifications:

System Compatibility:

• Compatible with Omron SYSMAC CJ1, CJ2, and NJ series CPU units

• Uses CJ-series I/O bus

• Mounts on CPU rack or expansion rack

• MIL connector interface requires separate MIL40 connector cable (e.g., XW2Z-100K)

• Compatible with terminal block conversion units (XW2D-40G6)

• Programming software: CX-Programmer (CX-One) / Sysmac Studio

Related Products:

• XW2Z-100K – 1 m MIL40 connection cable for CJ1W-OD232

• XW2D-40G6 – General-purpose I/O terminal block with MIL40 socket, M3 captive screws, 40 points

• XW2K-40G-O32C – PLC interface wiring system with Push-in Plus technology, 40 points MIL connector

• G70V-SOC16P-1 – Relay terminal, PLC Output, 16 channels, PNP, Push-in terminals

• CJ1W-OD231 – 32-point PNP transistor output unit (Fujitsu/OTAX connector)

• CJ1W-ID232 – 32-point DC input unit (MIL connector)

• CJ1W-OD262 – 64-point PNP transistor output unit (MIL connector, 2 × 40-pin)

• CJ1W-PA205R – Power supply unit, 100-240 V AC, 25 W, with RUN output

• CJ1W-BC103 – 3-slot CPU rack

PLC ERA is an independent industrial automation distributor supplying genuine Original New products through established global supply channels. All products are factory sealed when applicable and undergo quality inspection prior to shipment. Omron and SYSMAC are trademarks of Omron Corporation.